Another thing that is certain in this life—besides death and taxes—is the fact that someday you will need to unclog a toilet. Many items can clog your toilet or the plumbing in your bathroom including hair, toilet paper, and yes, even razors, jewelry, or if you live in my house, toys. You do not need to call a plumber every time your toilet clogs up. In fact, there are some very simple tricks you can use to unclog the toilet yourself. A rule to follow here is never flush the toilet more than once when you see that it is clogged. This can easily cause the toilet to overflow, and if you are not prepared, you will have a huge mess in your bathroom!
HOT WATER AND DISH SOAP
One of the most common and easiest ways to loosen a clog in your toilet is by squirting some dish soap into the toilet drain, followed by a large bucket of hot water. This works by raising the temperature of the water surrounding the clog, and may loosen whatever is clogging your pipes enough to let it go free. The dish soap also gives a bit of lubrication during this process. Once you have done this, and the clog is gone, dump another bucket of hot water down the toilet to remove any excess gunk that might have built up in your pipes.
Plunging is probably the most common way of unclogging a toilet. I can honestly say that I use this method at least once a day in my household. Unfortunately this does not work if the clog is caused by something hard like a toy, but if you know that the clog is either caused by toilet paper, hair, or something else, reach for the plunger! Make sure there is water covering the ball end of the plunger. If there isn’t enough water in the toilet to do this, you will need to add more water. This will create a better seal and allows for more pressure. Use the plunger firmly and once the water leaves the toilet bowl, you can safely flush the toilet again to make sure the clog is fully removed. After you have plunged the clog away, dump a bucket of hot water down the toilet to release any excess debris that may clog the toilet in the future.
Another option you can try if neither of the above worked for you is to use a sewer snake. Sewer snakes are coiled wires that can easily move through the pipes of your household plumbing, loosening anything that may be clogging it up. What you need to do is insert one end of the snake into the toilet and work it through until you have reached the clog. When you cannot go any further, twist and push the sewer snake until you break through whatever is clogging the pipe. Once the water begins to drain out you can simply flush the toilet again to remove any excess debris.
If these suggestions don’t work give us a call at 403-279-7554 or book online.